Greater Moncton — New Brunswick
Framing in Moncton.
Square, plumb, and ready for the trades behind us.
Framing in Moncton
Local conditions, handled.
Moncton is part of our regular New Brunswick service area. We run framing here out of Halifax, grouping Greater Moncton jobs so scheduling stays predictable and the drive never becomes your problem. Square, plumb, and ready for the trades behind us.
Moncton has been one of the faster-growing centres in Atlantic Canada, and its housing splits accordingly. The older neighbourhoods around the downtown and the Mountain Road corridor hold century-old and mid-century homes wanting full renovation, while the newer subdivisions in the north end are recent builds where the work is finishing basements, adding decks and upgrading builder-grade finishes. We serve Greater Moncton from our Halifax base and schedule the three communities together.
Conditions matter here: greater Moncton runs colder inland winters than coastal Nova Scotia, which means deeper frost and a real cold-weather construction season. On a framing job that is not academic, because wind uplift and snow load decide how the connections and the load path get detailed.
We work in Westmorland County regularly enough to know what the local building department will want to see for framing, and we confirm it for your specific scope rather than going from memory. Permit application, inspection booking and the schedule around them are ours to manage. The quote is line by line, and every change is written down before it happens.
At a glance
- Service area
- Moncton, NB
- Region
- Greater Moncton
- Permitting
- Westmorland County
- Based in
- Halifax, NS
- Included
- 6 deliverables, 4 stages
- Quotes
- Free, line-item, written change orders
What’s included
Six things you are buying.
- Floor systems, walls, roofs and additions framed to the drawings
- Hurricane and uplift connections detailed for post-tropical wind loads
- Sheathing and nailing to schedule, not by eye
- Continuous load path maintained from roof through to foundation
- Structural alterations in existing homes — beams, headers, temporary shoring
- Deck checked for square and level before walls go up, and corrected if it is not
How it runs
Four stages in Moncton.
- 01
Drawings and takeoff
We read the drawings, flag anything that will not build as drawn, and do a materials takeoff so lumber is ordered once rather than in four trips.
- 02
Deck and layout
Floor system in, deck checked for square and level, plate layout snapped and marked. Everything after this inherits whatever we get right here.
- 03
Walls, roof and sheathing
Walls stood, braced and plumbed, roof framed or trusses set, sheathing on and nailed to schedule with uplift connections installed as we go.
- 04
Walk and hand-off
We walk the frame with you before it disappears behind insulation, note anything the following trades need to know, and leave the site swept.
Also in Moncton
The other 11 services we run here.
Questions
Framing in Moncton, answered.
Yes. Moncton is part of our regular service area and we run framing here from our Halifax base, grouping Greater Moncton jobs so scheduling stays predictable. We also work in Dieppe, Riverview, Amherst, Fredericton, so if you are just outside Moncton it is worth asking. Call 647-864-2058 and we will tell you honestly what the timeline looks like.
There is no honest flat rate for framing in Moncton, because the same job on two Westmorland County properties can differ substantially. The variables that matter most are the condition of the existing structure, access, material choice, and how much of the preparation stage — walls, roof and sheathing — the property actually needs. We quote line-item so nothing is bundled into a single number you cannot interrogate. Call 647-864-2058 for a free quote.
Yes, as standard rather than as an upgrade. Storms like Dorian and Fiona did most of their structural damage at connections — roof-to-wall and wall-to-foundation — rather than by breaking members. We detail the uplift path continuously and nail sheathing to the schedule, which is where wind resistance actually comes from.
Yes, and it is common work for us. The complication is usually what we find at the tie-in: balloon framing, undersized or notched joists, or a floor that has settled. We open it up, tell you what is actually there, and price the correction separately so you can decide how far to take it.
Sometimes, and it depends on why. Settlement at a beam or post can often be corrected with jacking and new support; a floor that was framed undersized a century ago is a bigger structural conversation. We will tell you which one you have before you commit to a budget, not after.
Start here
Framing in Moncton.
Free quotes, line by line. Call us on 647-864-2058, or send the form and we will arrange a time to walk the property.